The Ultimate Guide To Fiat 500 Replacement Key Fob

Add a Sparkle to Your Fiat 500 Key Fob

These adorable Silicone Covers will add a little excitement to your Fiat 500 Key fob. They are easy to install and snap in place of the original black cover.

The silicone covers protect your keys from dust and splashes. They also make your key look more stylish. The signals produced by the remote control of your key are not affected and can be used even with the cover on.

Make sure your key is protected from splashes, dust and other contaminants.

Add a stylish touch to your key with this silicone cover. It is perfectly positioned around the key fob and isn't slipping. It also protects your key from splashes and dust. The silicone cover will not interfere with the signals sent by your key remote. Therefore,  fiat 500 key cover  can use your key fob's buttons like you normally do.

Accessorize your Fiat 500 in Grey or Black with these cool covers. They are ideal if your original key cover is starting to look scruffy, dented or scratched. The covers are made of high quality silicone and come with two key rings, so they can be swapped out when you're bored of the same color.

These covers are designed to replace the black stock key cover that came with your vehicle. These covers won't fit when you have the original key cover.

Great look!

Fiat is a distinctive and renowned Italian brand and their cars sport an incredible look that sets them apart from the rest of the pack. These sparkly car key covers are a simple and enjoyable option to add a touch of glamour to your keys without being too loud. They look fantastic on the key fob and truly refresh an old one.

These covers are made to replace the black cover. They snap in place easily. It is recommended to remove the old cover before installing this.

The Fiat logo is printed in both Grey and black. If you change your mind, you can always change it! These are also great presents for Fiat 500 drivers.

Easy to install

Fiat 500 key covers can be a great way to upgrade your keys. You can pick from a wide range of colors and styles to choose the one that matches your style. The most appealing aspect is that they're easy to install, which means you can install them within a matter of 10 minutes. You will require a screwdriver and some patience. The first step is removing the cover. The original cover needs to be removed prior to the replacement can be installed.

After removing the old cover, you can employ a flathead to remove the four major attachment clips out of the passenger side of the fob assembly. These are marked in red on the image below. Also, note the tabs for locating slots shown in yellow that require disengagement as well.

Replace the old battery with a # CR2032 coin cell battery. Make sure that the "+" positive side of the battery corresponds to the opening of the fob, and that the -" negative side is facing the rubber buttons.

Reattach the mirror's passenger side cover by aligning the tabs that locate it. Once you've done this, place the driver side fob back in your vehicle and test it by pressing the button on the front of the car key. If everything is working as it should the parking lights will be turned on and the doors should automatically lock.

Easy to remove

Fiat 500 Key Covers are a delightful way to refresh your key fob. They're easy to set up and have a distinctive appearance. They guard your key fob against dirt, scratches and smudges. However, before you install a new cover for your key you must remove the original cover from your vehicle.

This is easily done by pressing the red "Fiat" button located on the front of your key fob. Pressing the button will release an lever that permits you to pull out the key ignition switch made of metal (1). After you've removed the metal keys you will discover a small silver metal switch that features images of a padlock locked and unlocked next to it. This is the key fob battery switch. The battery is simple to replace by turning the switch a quarter turn with a screwdriver with a flat head.

The key fob comes with an embedded microchip that's used to communicate with the Body Control Module (BCM). When you insert your Fiat key it presses the button on the ignition switch that is used to remind you of the "key-inignition". The BCM will then be capable of reading the transponder on the key fob, and verify that it's valid.

You can also choose to add the twin pack of sport design to give a unique, fun look to your key covers. These covers snap in place over the original cover. They are available in Cream and Silver. The key cover only works if you remove the black cover from your key fob.